|本期目录/Table of Contents|

[1]俞含琪,孙辉,于斌.聚电解质@PLA熔喷非织造材料柔性湿度传感器的制备及其传感性能[J].浙江理工大学学报,2023,49-50(自科六):709-717.
 YU Hanqi,SUN Hui,YU Bin.Preparation of a polyelectrolyte @ PLA meltblown nonwoven material flexible humidity sensor and its sensing performance[J].Journal of Zhejiang Sci-Tech University,2023,49-50(自科六):709-717.
点击复制

聚电解质@PLA熔喷非织造材料柔性湿度传感器的制备及其传感性能()
分享到:

浙江理工大学学报[ISSN:1673-3851/CN:33-1338/TS]

卷:
第49-50卷
期数:
2023年自科第六期
页码:
709-717
栏目:
出版日期:
2023-11-10

文章信息/Info

Title:
Preparation of a polyelectrolyte @ PLA meltblown nonwoven material flexible humidity sensor and its sensing performance
文章编号:
1673-3851 (2023) 11-0709-09
作者:
俞含琪孙辉于斌
1.浙江理工大学纺织科学与工程学院(国际丝绸学院),杭州 310018;2.浙江省现代纺织技术创新中心,浙江绍兴 312000
Author(s):
YU Hanqi SUN Hui YU Bin
1.College of Textile Science and Engineering (International Institute of Silk), Zhejiang SciTech University, Hangzhou 310018, China; 2.Zhejiang Provincial Innovation Center of Advanced Textile Technology, Shaoxing 312000, China
关键词:
聚乳酸聚电解质熔喷非织造材料柔性湿度传感器传感性能
分类号:
TB324;TB34
文献标志码:
A
摘要:
为获得高性能、易便携的柔性湿度传感器,以1,6己二醇二丙烯酸酯(HDDA)为交联剂,将不同摩尔质量比的聚电解质2(二甲氨基)甲基丙烯酸乙酯季铵盐(DEB)与甲基丙烯酸甲酯(MMA)通过紫外光固化交联反应负载在聚乳酸熔喷非织造材料(Polylactic acid meltblown nonwovens material,PLA MB)表面,制得聚电解质@PLA熔喷非织造材料(DEB/MMA@PLA MB)柔性湿度传感器,并探讨DEB和MMA的摩尔质量比对柔性湿度传感器的形貌、组成、传感性能和力学性能的影响。结果表明:经过紫外光固化交联反应后,DEB/MMA在PLA MB表面可均匀成膜;当DEB与MMA摩尔质量比为1∶2时,DEB/MMA@PLA MB传感器在相对湿度10%~90%条件下,传感性能良好、线性关系良好且响应时间短(10~80 s);在高湿环境(相对湿度53%~91%)下,其响应时间仅为10 s,且具有静态稳定性和较好的动态稳定性;与原PLA MB相比,DEB/MMA@PLA MB柔性湿度传感器的拉伸强度有所下降,但断裂伸长率显著提高。该文有望可为生物可降解PLA MB在传感器制备方面的应用提供参考。

参考文献/References:

[1]Davis R E, McGregor G R, Enfield K B. Humidity: A review and primer on atmospheric moisture and human health[J]. Environmental Research, 2016, 144: 106116.

[2]Dai J X, Zhao H R, Lin X Z, et al. Ultrafast response polyelectrolyte humidity sensor for respiration monitoring[J]. ACS Applied Materials & Interfaces, 2019, 11(6): 64836490.

[3]Cao Q, Yu C, Cheng X F, et al. Polysquaramides: Rapid and stable humidity sensing for breath monitoring and morse code communication[J]. Sensors and Actuators B: Chemical, 2020, 320: 128390.

[4]MoratallaLpez N, Lorenzo C, Chaouqi S, et al. Kinetics of polyphenol content of dry flowers and floral bioresidues of saffron at different temperatures and relative humidity conditions[J]. Food Chemistry, 2019, 290: 8794.

[5]Cheng Y H, Wang J G, Qiu Z J, et al. Multiscale humidity visualization by environmentally sensitive fluorescent molecular rotors[J]. Advanced Materials, 2017, 29(46): 1703900.

[6]Zafar Q, Abdullah S M, Azmer M I, et al. Influence of relative humidity on the electrical response of PEDOT: PSS based organic fieldeffect transistor[J]. Sensors and Actuators B: Chemical, 2018, 255: 26522656.

[7]Liu M Y, Guo S B, Xu P C, et al. Revealing humidityenhanced NH3 sensing effect by using resonant microcantilever[J]. Sensors and Actuators B: Chemical, 2018, 257: 488495.

[8]Palaparthy V S, Kalita H, Surya S G, et al. Graphene oxide based soil moisture microsensor for in situ agriculture applications[J]. Sensors and Actuators B: Chemical, 2018, 273: 16601669.

[9]李承臻. 柔性湿度传感器的制备与湿敏性能研究[D]. 成都: 电子科技大学, 2019: 47.

[10]倪旭. 高分子湿敏涂层的构筑及其性能研究[D]. 无锡: 江南大学, 2020: 1314.

相似文献/References:

[1]张琦a,于斌a,韩建a,等. 电气石改性聚乳酸切片的制备及分析[J].浙江理工大学学报,2012,29(04):480.
 ZHANG Qia,YU Bina,HAN Jiana,et al. Preparation and Analysis of Polylactic Acid ResinContaining Tourmaline[J].Journal of Zhejiang Sci-Tech University,2012,29(自科六):480.
[2]帅宁,王家俊,孙玉廷.纳米二氧化钛粒子对聚乳酸非等温结晶过程的影响[J].浙江理工大学学报,2015,33-34(自科6):776.
 SHUAI Ning,WANG Jia jun,SUN Yu ting.Effect of NanoTitanium Dioxide Particles on the Nonisothermal Crystallization Process of Polylactic Acid[J].Journal of Zhejiang Sci-Tech University,2015,33-34(自科六):776.
[3]曹勇民,于斌,韩建,等.PDLLA PCL PDLLA的添加对 PLA/PCL共混材料力学性能的影响[J].浙江理工大学学报,2016,35-36(自科4):538.
 CAO Yongmin,YU Bin,HAN Jian,et al.Effect of PDLLA PCL PDLLA on Mechanical Property  of PLA/PCL Blending Matrtial[J].Journal of Zhejiang Sci-Tech University,2016,35-36(自科六):538.
[4]周莹,王家俊,邹元虎,等.氧化石墨烯/聚乙烯醇层层自组装提高聚乳酸薄膜阻隔性能[J].浙江理工大学学报,2016,35-36(自科6):837.
 ZHOU Ying,WANG Jiajun,ZOU Yuanhu,et al.Improving Barrier Properties of PLA Film by LayerbyLayer Selfassembly of Graphene Oxide/Polyvinyl Alcohol[J].Journal of Zhejiang Sci-Tech University,2016,35-36(自科六):837.
[5]任瓯越,钟辉辛,孙辉,等.金银花精油微胶囊复合/PLA熔喷非织造材料的制备及其抗菌性能[J].浙江理工大学学报,2022,47-48(自科五):465.
 REN Ouyue,ZHONG Huixin,SUN Hui,et al.Preparation of honeysuckle essential oil microcapsule/ PLA melt blown nonwovens and its antibacterial properties[J].Journal of Zhejiang Sci-Tech University,2022,47-48(自科六):465.
[6]姚若兰,李晓莲,杨海亮,等.聚乳酸热解行为及其机理分析[J].浙江理工大学学报,2022,47-48(自科六):779.
 YAO Ruolan,LI Xiaolian,YANG Hailiang,et al.Analysis of the pyrolysis behavior of polylactic acid and its mechanism[J].Journal of Zhejiang Sci-Tech University,2022,47-48(自科六):779.

备注/Memo

备注/Memo:

收稿日期: 2023-02-22

基金项目: 浙江省自然科学基金项目(LTGS23E030005)

作者简介: 俞含琪(1997-),女,杭州人,硕士研究生,主要从事熔喷非织造材料功能改性方面的研究。

通信作者: 孙辉,Email:wlzxjywl@126.com

更新日期/Last Update: 2023-11-14