|本期目录/Table of Contents|

[1]方萱,陈建军.碳纤维增强 SiBOC 陶瓷基复合材料的制备及其力学性能研究[J].浙江理工大学学报,2026,55-56(自科二):125-133.
　FANG Xuan,CHEN Jianjun.A study on the preparation and mechanical properties of carbon fiber-reinforced SiBOC ceramic matrix composites[J].Journal of Zhejiang Sci-Tech University,2026,55-56(自科二):125-133.
点击复制

碳纤维增强 SiBOC 陶瓷基复合材料的制备及其力学性能研究()

浙江理工大学学报[ISSN:1673-3851/CN:33-1338/TS]

卷:
55-56
期数:
2026年自科第二期
页码:
125-133
栏目:
出版日期:
2026-03-15

文章信息/Info

Title:
A study on the preparation and mechanical properties of carbon fiber-reinforced SiBOC ceramic matrix composites
文章编号:
1673-3851(2026) 03-0125-09
作者:
方萱; 陈建军
浙江理工大学 ,a. 材料科学与工程学院;b. 先进陶瓷材料与纤维研究所 ,杭州 310018
Author(s):
FANG Xuan; CHEN Jianjun
a. School of Materials Science& Engineering; b. Institute of Advanced Ceramic Materials & Fibers, Zhejiang Sci-Tech University, Hangzhou 310018, China
关键词:
SiBOC陶瓷; 浆料; 填料含量; 六方氮化硼; 前驱体浸渍裂解; Cf/SiBOC陶瓷性能
分类号:
TB34
文献标志码:
A
摘要:
碳纤维增强 SiBOC陶瓷基复合材料(Cf/SiBOCCMC)具有低密度、高强度以及优异的耐高温和抗氧化 性能 。为了进一步提高 Cf/SiBOCCMC力学性能 , 以聚硼硅氧烷(PBS) 、纳米六方氮化硼(h-BN) 、碳化硅(SiC) 和炭 黑为原料制备了不同填料含量的混合浆料 , 并以混合浆料为前驱体 , 采用前驱体浸渍裂解(PIP) 工艺制备了 Cf/ SiBOCCMC ;分析填料含量对 SiBOC陶瓷前驱体浆料黏度的影响 , 以及浆料中填料含量与 PIP循环次数对复合材 料孔隙率、体积密度与力学性能的影响 ;通过旋转黏度仪、场发射扫描电子显微镜和万能试验机对样品进行表征。 结果表明:以填料含量为 13.77% ,黏度为 881.33mPa·s的浆料为前驱体 ,所制备的 Cf/SiBOCCMC力学性能在 4 次 PIP循环后达到最优 ,抗弯强度和断裂韧性分别为 202.33MPa和 7.61MPa·m1/2 ,相比未添加填料的复合材料分 别提升了 49.87%和19.28% ,对应的孔隙率和体积密度分别为 7.16%和 1.6767g/cm3 。该研究可为 SiBOC陶瓷基 复合材料力学性能的提升提供一定的参考。

参考文献/References:

[1]Xu TH,MaQS,Chen ZH.High-temperature behavior of C/ SiOC composites in inert atmosphere[J].Materials Science and Engineering:A,2011,530:266-270.

[2] Ma Q S, Chen Z H, Zheng W W , et al. Effects of pyrolysis processes on microstructure and me chanical properties of Cf/ SiOC compositesfabricatedbypreceramicpolymerpyrolysis[J]. CeramicsInternational, 2005, 31(2) : 305-314.

[3] 施巧英 , 李静丹 , 甘念渝 , 等. 连续吸波 SiC纤维增强 SiOC陶 瓷基复合材料的高温吸波性能[J]. 材料工程 , 2025, 53(01) : 81-90.

[4] 郭蕾 , 马青松 , 陈雅琦. PIP法制备 C/SiOC复合材料的微结构 演变与力学性能[J]. 材料工程 , 2023, 51(08) : 162-169.

[5] Wu QQ, WangZ, DingQ, etal. C/SiOCcompositesbyamodified PIP using solid polysiloxane: Fabrication, microstructure and mechanicalproperties[J]. JournalofInorganicMaterials, 2019, 34 (12) : 1349-1356.

[6] Rau A V, KnottK, Lu K. Porous SiOC/SiC ceramics via an active-filler-catalyzed polymer-derived method [J]. Materials ChemistryFrontiers , 2021, 5(17) : 6530-6545.

[7] DengYM, Ren B, JiaYJ, etal. Layered compositesmade of polymerderivedSiOC/ZrB2 reinforcedbyZrO2/SiO2 fiberswith simultaneous microwave absorption and thermalinsulation[J]. JournalofMaterialsScience & Technology, 2024, 196: 50-59.

[8] ZhangGJ, ShiQ Y, ZhangW X, etal. HighperformanceSiC/ SiOC composites with in situ carbon interface[J]. Ceramics International, 2023, 49(14) : 23011-23019.

[9] Zhao Y H, Guo L, Ma Q S. Effects of in situ formed nanostructures on the structure and properties of C/SiOC composites[J]. JournaloftheAmericanCeramicSociety, 2024, 107(8) : 5338-5351.

[10] YangF, Xue J M, Wang C X, et al. In-situ construction of carbon fiber gradient periodic structure in Al2O3f/SiOC composites for ultra-broadband and high-temperature electromagnetic wave absorption[J]. Journal of Materials Science& Technology, 2024, 194: 87-97.

[11] YinJ, LeeSH, Feng L, etal. The effects ofSiC precursors on the microstructures and mechanical properties of SiCf/SiC composites prepared via polymer impregnation and pyrolysis process [J]. CeramicsInternational, 2015, 41(3) : 4145-4153.

[12] Colombo P, Mera G, Riedel R, et al. Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics [J]. Journalofthe American CeramicSociety, 2010, 93(7) : 1805-1837.

[13] 胡智瑜 , 马青松. 异质元素改性聚硅氧烷衍生 SiOC陶瓷研究 进展[J]. 材料工程 , 2019, 47(7) : 19-25.

[14] SongYJ, ZhangZW , ChenK, etal. Pseudolow-temperature sintering effectandmicrostructureevolutionofSiBCO ceramics [J]. CeramicsInternational, 2021, 47(7) : 8888-8894.

[15] GencerA, OksalBS. Synthesis and characterization ofnovel SiBOC ceramics: Comparison of microwave and ultrasonic application on gelation time[J]. JournalofSol-GelScienceand Technology, 2015, 73(1) : 171-180.

[16] Ganesh Babu T, Devasia R. Boron-modified phenol formaldehyde resin-based self-healing matrix for Cf/SiBOC composites [J]. AdvancesinAppliedCeramics, 2016, 115(8) : 457-469.

[17] BurgerN, LaachachiA, FerriolM, etal. Review of thermal conductivity in composites: Mechanisms, parameters and theory [J]. Progressin PolymerScience, 2016, 61: 1-28.

[18] Liu FH, YiMZ, RanLP, etal. Effectofsilanegraftedh-BN fillers on microstructure and mechanical properties of CVI- based C/C-BN composites[J]. Materials Characterization, 2021, 171: 110765.

[19] JianK, ChenZH, MaQS, etal. Processingandpropertiesof 2D-Cf/SiC composites incorporating SiC fillers[J]. Materials Scienceand Engineering: A, 2005, 408(1/2) : 330-335.

[20] LiangJ J, Xiao H N, Gao P Z, et al. Microstructure and propertiesof2D-Cf/SiC compositefabricatedbycombinationof CVI and PIP process with SiC particle as inert fillers[J]. CeramicsInternational, 2017, 43(2) : 1788-1794.

[21] 张健 , 行小龙 , 刘祎 , 等. 可陶瓷化酚醛树脂及其复合材料研 究进展[J]. 高分子材料科学与工程 , 2025, 41(1) : 172-182.

[22] 王震 , 董绍明 , 高乐 , 等. 活性填料法制备 Cf/SiC-BN复合材 料[J]. 稀有金属材料与工程 , 2009, 38(S2) : 541-543.

[23] 杨亚云 , 林文松 , 段丽慧. SiC微粉加入对 PIP法制备 3D-Cf/ SiC复合材料的影响[J]. 硅酸盐通报 , 2015, 34(11) : 3263- 3266.

[24] Zhu Y Z, Huang Z R, Dong SM, et al. Manufacturing 2D carbon-fiber-reinforced SiC matrix composites by slurry infiltration andPIP process[J]. CeramicsInternational, 2008, 34(5) : 1201-1205.

[25] DrozdovFV, ManokhinaEA, Vu TD, etal. Polyborosiloxanes (PBS) : Evolutionofapproachesto thesynthesisand theprospects oftheirapplication[J]. Polymers, 2022, 14(22) : 4824.

[26] BoccacciniAR, StruttA J, Vecchio K S, et al. Behavior of NicalonTM-fiber-reinforced glass-matrix composites under thermal cycling conditions[J]. Composites Part A: Applied Scienceand Manufacturing, 1998, 29(11) : 1343-1352.

[27] 安娜. 惰性填料 SiC对 C/C-SiC复合材料制备及烧蚀性能影响 研究[J]. 合成材料老化与应用 , 2017, 46(4) : 42-46, 98.

[28] 赵志明 , 李文琼 , 靳朝辉 , 等. 硅烷偶联剂 KH550改性白炭黑 及其在环氧树脂中的应用[J]. 合成材料老化与应用 , 2023, 52 (04) : 15-18.

[29] JoyJ, GeorgeE, Thomas S, etal. Effectoffiller loading on polymerchain confinementand thermomechanicalpropertiesof epoxy/boron nitride(h-BN) nanocomposites[J]. New Journal ofChemistry, 2020, 44(11) : 4494-4503.

[30] Zhao R D, Pang SY, Hu C L, et al. Fabrication ofC/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preformsand theirproperties[J]. Journalofthe European CeramicSociety, 2023, 43(2) : 273-282.

相似文献/References:

[1]李永祥,兰淑仙,秘一芳,等.基于模型粘附物的锦纶染色品白斑瑕疵成因分析[J].浙江理工大学学报,2019,41-42(自科五):566.
　LI Yongxiang,LAN Shuxian,MI Yifang,et al.Study on formation mechanism of white spot defects on dyed nylon fabrics based on adhesive model[J].Journal of Zhejiang Sci-Tech University,2019,41-42(自科二):566.
[2]李晓莲,郑海玲,陈海相,等.浆纱棉织物中聚乙烯醇的Py-GC/MS快速鉴别研究[J].浙江理工大学学报,2024,51-52(自科一):47.
　LI Xiaolian,ZHENG Hailing,CHEN Haixiang,et al.Rapid identification study of polyvinyl alcohol in  sized cotton fabrics by Py-GC/MS[J].Journal of Zhejiang Sci-Tech University,2024,51-52(自科二):47.

备注/Memo

备注/Memo:
基金项目 : 浙江省自然科学基金重点项目(LZ23E020003) ; 国家自然科学基金项目(51872262)收稿日期 : 2024-03-31 网络出版日期 : 2025-05-12
作者简介 : 方 萱(2002— ) ,女 ,江西抚州人 ,硕士研究生 ,主要从事有机硅前驱体和陶瓷基复合材料方面的研究。通信作者 : 陈建军 ,E-mail:chen@zstu. edu. cn
更新日期/Last Update: 2026-03-06