|本期目录/Table of Contents|

[1]周陈菊,郑忠云,王少锋,等. 铝合金表面激光熔覆高硅涂层的组织与磨损性能[J].浙江理工大学学报,2012,29(02):254-258.
 ZHOU Chen\|ju,ZHENG Zhong\|yun,WANG Shao\|feng,et al. Microstructure and Wear Resistance of High Si Layer onAluminum Alloys by Laser Cladding[J].Journal of Zhejiang Sci-Tech University,2012,29(02):254-258.
点击复制

 铝合金表面激光熔覆高硅涂层的组织与磨损性能()
分享到:

浙江理工大学学报[ISSN:1673-3851/CN:33-1338/TS]

卷:
第29卷
期数:
2012年02期
页码:
254-258
栏目:
纺织与服装工程
出版日期:
2012-04-28

文章信息/Info

Title:
 Microstructure and Wear Resistance of High Si Layer onAluminum Alloys by Laser Cladding
文章编号:
16733851 (2012) 02025405
作者:
 周陈菊1 郑忠云2 王少锋1 曾红春1 席珍强1
 1.浙江理工大学材料工程中心, 杭州 310018; 2.西南油气田分公司, 成都 610051
Author(s):
 ZHOU Chen\|ju1 ZHENG Zhong\|yun2 WANG Shao\|feng1 ZENG Hong\|chun1 XI Zhen\|qiang1
 1. Materials Engineering Center, Zhejiang Sci\|Tech University, Hangzhou 310018, China;2. PetroChina Southwest Oil&Gasfield Company, Chengdu 610051, China
关键词:
 铝合金 激光熔覆 高硅涂层 微观组织 硬度 耐磨性能
分类号:
TG146.27
文献标志码:
A
摘要:
     用7 kW横流CO2激光器在ZLl01铝合金表面激光熔覆高硅涂层。探索不同激光功率熔覆对涂层质量的影响,分析涂层的微观组织,测试涂层的硬度和磨损性能。结果表明:在优化工艺参数下制备出的激光熔覆高硅涂层组织致密、无气孔和裂纹,激光熔覆层中存在大量初晶Si、α\|Al树枝晶和共晶组织。涂层与基体结合区处呈现典型的外延生长特征,形成了良好的冶金结合。熔覆层的横截面硬度在HV150~320之间,是基体的2~3倍,并显著提高了基体的耐磨性能。

参考文献/References:

 [1] Sun R L, Lei Y W. Microstructure and hardness of laser clad SiCp\|Al composite coatings on Al alloys[J]. Materials Letters, 2008, 62: 3272\|3275.
[2] Anandkumar R, Almeida A, Vilar R. Wear behavior of Al\|12Si/TiB2 coatings produced by laser cladding[J]. Surface & Coatings Technology, 2011, 205: 3824\|3832.
[3] Yang S, Chen N, Liu W J, et al. In situ formation of MoSi2/SiC composite coating on pure Al by laser cladding[J]. Materials Letters, 2003, 57: 3412\|3416.
[4] Dubourg L, Ursescu D, Hlawka F, et al. Laser cladding of MMC coatings on aluminium substrate: influence of composition and microstructure on mechanical properties[J]. Wear, 2005, 258: 1745\|1754.
[5] Anandkumar R, Almeida A, Colaco R, et al. Microstructure and wear studies of laser clad Al\|Si/SiC(p) composite coatings[J]. Surface & Coatings Technology, 2007, 201: 9497\|9505.
[6] Staia M H, Cruz M, Dahotre N B. Microstructural and tribological characterization of an A\|356 aluminum alloy superficially modified by laser alloying[J]. Thin Solid Films, 2000, 378: 665\|674.
[7] Simchi A, Godlinskic D. Effect of SiC particles on the laser sintering of Al\|7Si\|0. 3Mg alloy[J]. Scripta Materialia, 2008, 59: 199\|202.
[8]田宪法, 耿浩然, 郁可, 等. 铝\|硅合金表面激光合金化处理[J]. 机械工程材料, 2003, 27(8): 44\|46.
[9]蔡珣, 赵涛, 陈秋龙, 等. 铸造铝合金激光表面改性金属—陶瓷梯度层[J]. 机械工程材料, 2002, 26(1): 25\|28.
[10]董世运, 韩杰才, 杜善义. 铝合金表面激光熔覆Cu基复合涂层的组织及摩擦磨损性能[J]. 材料工程, 2002(2): 26\|29.
[11] Pei Y T, De\|Hosson J T M. Functionally graded materialsproduced by laser cladding [J]. Acta Materialia, 2000, 48: 2617\|2624.
[12] Tomida S, Nakata K, Shibata S, et al. Improvement in wear resistance of hyper\|eutectic Al\|Si cast alloy by laser surface remelting[J]. Surface and Coatings Technology, 2003, 169: 468\|471.
[13] Pelletier M J, Renaud L, Fouquet F. Solidification microstructures induced by laser surface alloying: influence of the substrate[J]. Materials Science and Engineering, 1991, A134: 1283\|1287.
[14] 陈光, 傅恒志. 非平衡凝固新型金属材料[M]. 北京: 科学出版社, 2004: 145\|152.
[15] Gaumann M, Henry S, C1eton F, et al. Epitaxial laser metal forming: analysis of microstructure formation[J]. Materials Science and Engineering, 1999, A271(1/2): 232\|241.
[16] Li H, Vilar R M. Laser beam processing of a SiC particulate reinforced 6061 aluminiummetal matrix composite[J]. Journal of Materials Science, 1997, 32: 5545\|5550.
[17] Tomlinson W J, Bransden A S. Sliding wear of laser alloyed coating on Al\|12% Si[J]. Journal of Materials Science Lerrers, 1994, 13: 1086\|1088.

相似文献/References:

[1]陈智杰a,赵晓丽a,徐畅b,等. 有机颜料微胶囊在涂料染色中的应用及其染色效果分析[J].浙江理工大学学报,2013,30(01):1.
 CHEN Zhi jiea,ZHAO Xiao lia,XU Changb,et al. Application of Organic Pigment Microcapsule in Pigment Dyeingand Its Dyeing Results[J].Journal of Zhejiang Sci-Tech University,2013,30(02):1.
[2]詹永娟,谢维斌,姜晓云,等. 织物液态水传递性能的自动检测技术及应用[J].浙江理工大学学报,2013,30(01):6.
 ZHAN Yong juan,XIE Wei bin,JIANG Xiao yun,et al. Technology and Application of the Automatic Detection inTesting Liquid Transport Properties of Textiles[J].Journal of Zhejiang Sci-Tech University,2013,30(02):6.
[3]孙麒. 基于极大似然估计的织物图像分割[J].浙江理工大学学报,2013,30(01):12.
 SUN Qi. Textile Image Segmentation Based on theMaximum Likelihood Algorithm[J].Journal of Zhejiang Sci-Tech University,2013,30(02):12.
[4]巫静a,田彦杰b,汪澜a,等. 基于SVM理论的涤纶织物分散染料上染率模型研究[J].浙江理工大学学报,2013,30(01):21.
 WU Jinga,TIAN Yan jieb,WANG Lana,et al. Research on Modeling of DyeUptake Rate for Disperse Dyes onPolyester Fibers Based on SVM[J].Journal of Zhejiang Sci-Tech University,2013,30(02):21.
[5]周昊,徐英莲,齐素梅.微孔结构改性涤纶/棉混纺针织物服用性能的研究[J].浙江理工大学学报,2013,30(01):21.
 ZHAO Hao,XU Ying lian,QI Su mei. Research on Using Knitted Blend Fabric of Modified Polyesterby Cellular Structure and Cotton for Wearing[J].Journal of Zhejiang Sci-Tech University,2013,30(02):21.
[6]孙佳英,李艳清,章斐燕,等. 纺织结构复合材料铺层顺序设计与力学性能分析[J].浙江理工大学学报,2013,30(01):27.
 SUN Jia ying,LI Yan qing,ZHANG Fei yan,et al. Study on Layer Sequence Design and Mechanical Propertiesof Textile Structure Composites[J].Journal of Zhejiang Sci-Tech University,2013,30(02):27.
[7]丁源维,王騊,姚菊明,等. 静电纺制备TiO2/PVA复合纳米纤维及其光催化性能研究[J].浙江理工大学学报,2013,30(01):31.
 DING Yuan wei,WANG Tao,YAO Ju ming,et al. Photocatalytic Performance Investigation of TiO2/PVANanofibers Prepared by Electrospinning[J].Journal of Zhejiang Sci-Tech University,2013,30(02):31.
[8]章梦洁,伍仲,方园. 涤棉混纺织物阻燃性能的实验分析[J].浙江理工大学学报,2013,30(01):36.
 ZHANG Meng jie,WU Zhong,FANG Yang. Experimental Study on the PolyesterCotton BlendedFabrics Flame Retardancy[J].Journal of Zhejiang Sci-Tech University,2013,30(02):36.
[9]胡觉亮a,孔云鹏b,韩曙光a,等. 基于随机需求的服装供应链回购契约研究[J].浙江理工大学学报,2013,30(01):40.
 HU Jue lianga,KONG Yun pengb,HAN Shu guanga,et al. Study on Repurchase Contract in a Fashion Chainwith the Stochastic Demand[J].Journal of Zhejiang Sci-Tech University,2013,30(02):40.
[10]毛雯,阎玉秀. 针织服装供应商评价指标体系构建与权重确定[J].浙江理工大学学报,2013,30(01):46.
 MAO Wen,YAN Yu xiu. Building Evaluation Index System for Knitting Clothing Suppliersand Determining the Weight[J].Journal of Zhejiang Sci-Tech University,2013,30(02):46.

备注/Memo

备注/Memo:
 收稿日期: 2011-09-09
作者简介: 周陈菊(1987-),女,浙江德清人,硕士研究生,主要从事激光表面改性研究。
更新日期/Last Update: